Safety shoes PROMPT DELIVERY
The best online bargains to buy Safety shoes
Discover our catalog of Safety shoes
€1.95 (VAT excl.)Anti - bacterial treated perforated insole to help keep your feet fresh and clean. Foam cushioned for added comfort. Cut to size.
€76.15 (VAT excl.)Low shoe, WRU suede back leather thickness 1,8-2,0 mm. Breathable and abrasion resistant fabric lining. Soft, lined and padded tongue. FOOTWEAR ENTIRELY WITHOUT METALLIC PARTS
€71.12 (VAT excl.)Calf boot in water-repellent WRU leather thickness 1,8-2,0 mm. Lining and tongue in felt with antibacterial WinTherm® safety aluminum microfilm and breathable and abrasion resistant ANTI-COLD fur.
There are not enough products in stock €28.71 (VAT excl.)The all-around solution for most footwear including boots with no toe cap. This traction aid is constructed with Tungsten-Carbide virtually non-sparking spikes for added safety.
€87.45 (VAT excl.)High shoe, IDROTECH® WRU oiled grain leather thickness 1,8-2,0 mm, with reflective insert. Heel in IDROTECH® WRU Nubuck grain leather thickness 1,8-2,0 mm. Soft Windtex® waterproof membrane lining, with excellent...
€63.28 (VAT excl.)Low shoe, in MICROWASH thickness 1,8-2,0 mm. Highly breathable and abrasion resistant fabric lining. Footwear with reflective fabric insert. Soft, lined and padded tongue. FOOTWEAR ENTIRELY WITHOUT METALLIC PARTS
€57.75 (VAT excl.)Low shoe, in MICROWASH thickness 1,8-2,0 mm. Breathable and abrasion resistant fabric lining. FOOTWEAR ENTIRELY WITHOUT METALLIC PARTS
€120.62 (VAT excl.)Calf boot, WRU anti-scratch back leather thickness 1,8-2,0 mm. Lining and tongue in felt with antibacterial WinTherm® safety aluminum microfilm and breathable and abrasion resistant ANTI-COLD fur. Footwear with...
€81.68 (VAT excl.)Low shoe, in breathable and abrasion resistant technical fabric and in WRU anti-scratch back leather thickness 1,8-2,0 mm. Highly breathable and abrasion resistant fabric lining. Footwear with reflective fabric...
€76.48 (VAT excl.)UPPER: Water repellent nubuck grain leather LINING: AIR FRESH 100% polyamide, run-proof, breathable, abrasion-resistant INSOLE: EVA LIGHT, anatomic, perforated, antibacterial, with shock absorber insert TOE CAP:...
€62.70 (VAT excl.)High shoe, in MICROWASH thickness 1,8-2,0 mm. Highly breathable and abrasion resistant fabric lining. FOOTWEAR ENTIRELY WITHOUT METALLIC PARTS
€81.68 (VAT excl.)High shoe, IDROTECH® WRU Nubuck grain leather thickness 1,8-2,0 mm. Breathable and abrasion resistant fabric lining. Footwear with reflective fabric insert. Soft, lined and padded tongue. FOOTWEAR ENTIRELY WITHOUT...
Safety shoes, how to choose the right model for your work
The right work shoes are never easy to find, as each worker prefers a certain model based on the shape of the sole of the foot, which is why very often companies find themselves having to buy different shoes for each worker.
We at King Kong Work have made a very strict choice regarding safety shoes, that is, we have decided to market only work shoes from 100% Italian manufacturers such as Lewer and Giasco, because they use quality materials and have scrupulous control of the production process, which results in comfort and lightness for the operator wearing our safety shoes. We are also very careful in the selection of models offered so as to ensure very high satisfaction to the customer who buys the shoes and excellent value for money, thanks to decades-long collaborations with our manufacturers. We specify that all models of safety shoes in our online store are ultra-comfortable and lightweight, in addition, the parts in contact with the foot are always composed of materials that ensure high breathability, and prevent excessive sweating of the foot even in the most extreme work situations.B
Mandatory regulations for safety shoes
It is most important for one's company to know all the relevant regulations of the safety shoes one is going to buy, below we will describe them:
- EN ISO 20345:2011 This standard is the international standard of protection for safety footwear, includes protection from major mechanical, anti-slip and thermal hazards. Within it, we can find a broad classification into different categories according to the level of protection the safety shoe offersB
SB: Indicates the presence in safety footwear of a toe cap that provides protection against impact injuries caused by heavy objects that might accidentally fall on the foot. Guarantees protection of 15 kN
SBP: Confirms the same protection as the SB safety shoe with added penetration resistance
S1: This standard sums up the protection of the SB safety shoe with fuel oil resistance and energy absorption in the heel area
S1P: Same standard as S1 with the addition of penetration resistance
S2: Same standard as S1 with the addition of resistance to water penetration and water absorption
S3: Regulatory feature of the accident prevention shoe resistant to any type of liquid, encapsulates all the regulations previously listed with the addition of ridges and a very high degree of impermeability.B
S4: Reference standard for anti-static safety shoes, the shoe is made entirely of rubber or polymer material
S5: Same standard as S4 with the addition of relief and liquid penetration resistance
Below is the list of additional requirements for special applications of safety shoes:
P: Penetration resistance
A: Anti-static safety footwear
CI: Safety shoe that provides insulation from the cold
E: Safety footwear that absorbs energy in the heel area
WR: Water resistance
M: Metatarsal protection
WRU: Water absorption and penetrationB
HRO: Heat contact resistance
FO: Resistance to fuel oils
- EN 61340-4-3:2002 This standard defines protection from electrostatic potential and indicates the degree of conduction and dissipation of the safety footwearB
- EN 13832-2: 2006 Protective footwear against chemical agents, to obtain this certification the footwear is placed in contact with chemical agents for 23 hours
- EN ISO 20347:2012 International standard specifying requirements for footwear used by those not directly exposed to mechanical hazards of impact or compression
- EN ISO 13287:2012 Specific standard indicating operator protection from slipping, a category is assigned based on the slipping surface on which it is tested, as can be seen below:
SRA: slip test on ceramic tiles with SLS
SRB: Slip test on steel surface with glycerol
SRC: Slip test on ceramic tiles with SLS + steel surface with glycerol
Customized safety shoes with your company logoB
King Kong Work offers a unique service of customizing their safety shoes with the company logo, this gives professionalism and seriousness to the company workers who wear them.
Our salespeople are available to advise you on the most suitable models of work shoes for your business. Also, available in our online store is a wide range of safety boots for every need.